Adhesive bonding and installation of drywall panels in one day. A modern technology for building to last

Tytan Professional is implementing a completely new system for the drywall partitioning sector. The DRYWALL SYSTEM is an easy and precise solution that will reinvent the work of each contractor – it allows quick, easy, and precise alignment of walls with drywall panels. 4 simple steps are enough to complete the process and it can be done in 1 day only!

The Tytan Professional brand is perfectly known to any professional dealing with home construction finishing. Its foam, acrylic, adhesive, and mortar compounds and other products indispensable for refurbishment and new construction projects have been growing in popularity and trust among construction contractors. Not surprisingly, Tytan Professional is a guarantee of high quality materials and fast and efficient work processing. By continuous testing and manufacturing process development, the range of Tytan Professional solutions now features its latest arrival: the DRYWALL SYSTEM, and end-to-end solution for drywall panel installation, enhanced with dedicated and market-wide unique positioning fixtures. It is a true, revolutionary innovation in the drywall partitioning industry for instant and perfect alignment of bonded drywall panels.

The DRYWALL SYSTEM rolled out by Tytan Professional is the first solution of its kind on the market to meet the challenges of drywall panel installation. Drywall hanging or installation is usually a highly labour-intensive interior finishing stage which requires lengthy preparations (to properly blend and liquefy the plaster adhesive), a coordinated effort of several workers (to bring the drywall panels true to plumb), and it often necessitates many corrections (caused by inherent irregularity of drywall panels, cracks in the compound, or distortion of the joints). The Tytan Professional DRYWALL SYSTEM does away with these challengers, allowing you to process each drywall partitioning project from A to Z: from adhesive bonding to alignment and finishing.

The comprehensive DRYWALL SYSTEM guarantees clean and efficient processing. Presented already in 2019, the innovative formula of the Tytan Professional Foam Adhesive for Drywall has made adhesive bonding of drywall panels easier and surprisingly fast. The ready-to-use foam adhesive is sold in handy cartridge cans which are much more convenient to handle than bulky bags of conventional adhesive mortar. It also provides a much better yield: 1 can (1 kg) of the Tytan Professional adhesive foam is enough to hang up to 10 m2 of drywall, which would otherwise take 40 kg of conventional dry adhesive mortar mix plus 20 litres of water.

Adhesive bonding is the first of the four steps of the DRYWALL SYSTEM processing. In just 30 minutes from application, the foam adhesive develops a firm hold quickly to facilitate downstream finishing work and advanced processing. Two hours later (which may vary with the ambience and humidity), the foam adhesive is fully cured to complete the finishing work. Everyone knows well that standard drywall masonry adhesives take as much as 2 to 4 days to cure! The time savings from the DRYWALL SYSTEM are simply staggering in comparison to conventional solutions. The foam adhesive also allows convenient alignment of the panels and other corrections: the purpose-made formula helps with easy repositioning of each panel by as much as 2 cm in any direction within 3 minutes from application.

For the second step of the process, the DRYWALL SYSTEM features the market’s first Drywall Positioning Kit designed specifically for drywall partitioning. No more clumsy alignment of the drywall panels, repeated checks with a spirit level, and reworking. The professionally designed positioning fixtures from Tytan Professional take less than one minute to align two adjacent drywall panels to one another. It is ten times faster than a conventional levelling and plumbing process.

The fixtures are quite easy to clamp over the drywall panel and produce a perfectly equidistant spacing between two adjacent panels, resulting in flawlessly aligned cladding. It is especially important in processing of drywall partitioning during home construction and makeovers, where the work surfaces are typically large and require high attention to detail and precision. The positioning fixtures help with a perfectly level alignment of a drywall stud partition or cladding along the whole room. The technology of perfectly matching positioning fixtures in the DRYWALL SYSTEM not only helps with plumbing, but also with joining true to the horizontal. All it takes is several taps and pushes to correctly position the drywall panels.

The DRYWALL SYSTEM for drywall partitioning includes professional construction chemicals for pointing joints. The Tytan Professional Joint Filling Putty for Drywall also requires no mixing with water or specific pre-processing. It is ready to use and its special formula is enhanced with microfibres to ensure a strong bond without any loss of elasticity. This minimises the risk of cracking joints, irregularities or sagging, and the finishing is bound to last. The DRYWALL SYSTEM is rounded off by its dedicated Tytan Professional Drywall Acrylic. This product is intended for filleting and sealing of inner corner beads or making flexible joints between the drywall edges and the ceiling. The compound features a high adhesion and elasticity to safely follow the drywall panelling behaviour while resisting cracking. The acrylic compound is twice better in elastic performance than generic acrylic compounds, with the behaviour compliance factor of 15%.

Any construction or refurbishment project! This universal drywall partitioning system is primarily intended for professional use, but it also works well for DIY home repairs and makeovers. The DRYWALL SYSTEM is perfect for quick repairs and time-sensitive restoration projects. It is great for finishing and refinishing of apartment for rent, hostels, and hotels; it only takes a few hours to do over the interior finish or simply refresh the walls without onerous rendering with plaster. It is a true innovation in tune with the latest trends in the construction industry.

The benefits of Tytan Professional DRYWALL SYSTEM applications have three strengths to note:

Short processing time

The processing time is reduced and the work efficiency is improved by:

1. Quick curing ‒ the latest quick-setting formulas of the adhesive foams, joining compounds, and acrylic compounds greatly reduce the finishing work time. The drywall panels are ready for joint pointing 30 minutes after bonding with the adhesive foam, and 2 hours later, the drywalls are ready for rendering, painting, or any finishing required by the project owner. The adhesive foam does not give off even a drop of water beneath the drywall panels, unlike the conventional plaster adhesives which require as much as 12 litres of process water per one bag of the dry mix. Every contractor knows well that excess process water must escape/evaporate from beneath the drywall panels; otherwise the downstream work steps may fail to deliver the required results. What is worse, a moisture too high beneath the drywall panels may cause defects (like flaking of paint) in just several months of operation. The DRYWALL SYSTEM solutions are immensely time-saving in comparison to as many as several days of pause before downstream processing with construction products from other brands.
2. Quick installation ‒ the high-quality foam adhesive and the kit of positioning fixtures minimise the time required for proper drywall alignment. It takes about 45 seconds to apply the Tytan Professional Foam Adhesive on one drywall panel (unlike 5 minutes with conventional adhesive mortars), and every two adjoining panels can be brought to plumb in less one minute once hung. This means that 20 to 30 panels can be installed in one hour, or as much as 100 m2 of drywall cladding. The work is done in a flash and provides tangible benefits. The comprehensive DRYWALL SYSTEM allows processing projects by one individual. This means significant savings on time and workforce. Now, a single contractor gang can process more apartments to be finished with drywall.

Convenient work

This advantage is driven by:

1. Insensitivity to process media ‒ when you choose the DRYWALL SYSTEM, you do not need to worry about access to mains power and water on site. Even if the site is still waiting for the water and power services to be connected, you can install drywall panels for a reliable and robust finish.
2. Working comfort ‒ the DRYWALL SYSTEM means clean and dust-free processing. A single box of the Tytan Professional adhesive foam contains 12 cartridge cans. It is easy to handle even in confined or hard to reach places, or to high storeys when there is no lift. An immensely huge advantage, compared to the struggle with heavy bags of conventional dry mix (12 cans replace 480 kg of dry adhesive mortar mix).

Precise execution

The accuracy and precision of each step facilitates downstream work, ensuring a great finish. Usually, a precise drywall installation requires great effort, deep experience and high skills of the contractors, but the DRYWALL SYSTEM is not challenging to process.

1. The innovative positioning fixture significantly help with efficient and convenient drywall panel alignment without more helpers or tools than required.
2. The perfectly level surface of the drywall cladding (which is free of joint faults and can be perfectly aligned and pointed flush) helps avoid corrections and resanding down the road.