Starter
Description
Scratch Coat is a cement based mortar applied directly onto the substrate before the application of finish layer of Tytan Building System. It is recommended for the mineral substrate preparation which will receive cement-lime plaster machine or manually applied. It improves the plaster adhesion to walls and ceilings, and levels the substrate absorption.
Benefits
Improves the adhesion to substrate
Increases the efficiency of the next layer
Vapour permeable
For mechanical or manual application
Technical parameters
Mixing ratio with water:
5,5–6,0 l for 25 kg of dry blend
Aggregate size:
up to 1,0 mm
Application temperature:
+5°C to +25°C
Compressive strength:
CS IV
Flexural strength:
≥ 2 MPa
Consumption:
4–8 kg/m²
Consumption time:
max. 3 h
Colour:
natural grey
EN 998-1 TYPE GP, CSIV, W2
Logistic table
Product name
Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid.
Starter
Content
25 kg
Packaging
Bag
Pieces per pallet
48
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Starter | 25 kg | Bag | 48 |
Sarnased kategoorias
Mur 2-10 Thin Bed Mortar
Loe rohkem
Brick 5-25 Clinker Mortar
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.