IS22 Fibre-Reinforced Mortar
Description
Fibre-Reinforced Mortar is designed to bond EPS (expanded polystyrene) and mineral wool boards and form reinforcing layers in Tytan Insulation System on perimeter walls of buildings, as well as to patch and smooth down the substrate for thin-coat decorative plasters.
Hoiatus: Järgige igal juhul toote etiketil esitatud teavet.
Benefits
Reinforced with fibres – unique FiberGel combination
High adhesion to mineral substrates, EPS and mineral wool boards
Resistant to extreme mechanical loads and thermal stresses
Highly impact resistant
Flexible and durable
Vapour permeable
Resistant to scratches and cracks
Resistant to weather conditions
External and internal walls
Pot life of a water mix: up to 2 h
Frost resistant when set
Technical parameters
Mixing ratio (water per bag):
approx. 5,5 - 7,5 l per 25 kg
Approximate consumption:
3-6 kg/m²
Reinforcing layer thickness:
3-5 mm
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +35°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to the insulating material boards:
after ageing: ≥0,08
Logistic table
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS22 Fibre Reinforced Mortar | 25 kg | Bag | 48 | Grey |
Sarnased kategoorias
Mur 2-10 Thin Bed Mortar
Loe rohkem
Brick 5-25 Clinker Mortar
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.