IS21 Adhesive & Reinforcement Mortar
Description
Adhesive & Reinforcement Mortar is designed to bond EPS (expanded polystyrene) boards and to form reinforcing layers in Tytan Insulation Systems. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Hoiatus: Järgige igal juhul toote etiketil esitatud teavet.
Benefits
Flexible
High adhesion to mineral substrates and EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Frost resistant after set
Pot life of a water mix: up to 2 h
Technical parameters
Mixing ratio (water per bag):
approx. 5,25-5,5 l per 25 kg
Consumption (dry mix):
3,5-5,5 kg/m²
Consumption (in the reinforced layer):
4,0-5,5 kg/m²
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS boards:
between layers after ageing: ≥0,08
Logistic table
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS21 Adhesive & Reinforcement Mortar | 25 kg | Bag | 48 | Grey |
Sarnased kategoorias
Mur 2-10 Thin Bed Mortar
Loe rohkem
Brick 5-25 Clinker Mortar
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.