Wood effect system
Description
Wood Effect Plaster created based on white cement, mineral fillers, and aggregate. Product plasticity and its working time were designed to support decorative works on facades, especially effects imitating wood. Special additives make the plaster easier to apply. When fully cured, it creates a breathable, strong, and durable coating that can be stained to achieve the expected colour of the wood.
Warning: Always follow the instructions on the product label.
Benefits
High plasticity and prolonged open time of the product supports in structuring the wood effect
Resistance to mechanical damage and microcracks
Resistant to biological corrosion
Good protection against moisture
To be staining for a more natural wood effect
Applications
For exterior and interior structural plaster effects
Applied on all seasoned, even, and load-bearing construction surfaces
Finishing layer in TYTAN ETICS EPS and TYTAN ETICS MW thermal insulation systems
Creates a protective and decorative surface coat for modelling the structure of natural wood
Technical parameters
Colour:
white
Mixing ratio (water per bag):
5,25÷5,5 l per 25 kg
Adhesion:
≥ 0,3 MPa
Vapour permeability, grade:
V1
Water absorption, grade:
W2
Consumption:
2,2-4,2 kg/m²
Painting:
after 3 days
Shelf-life:
12 months
emperature of application:
from +5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Logistic table
| Product name A unique code assigned to the respective product variants, specifying their capacity, size and colors. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Wood Effect Plaster | 25 kg | Bag | 48 |
Similar in category
Architectural Concrete
Read more
Mur 2-10 Thin Bed Mortar
Read more
Do you have questions about the product?
Did not find the information on the website, want to learn more?
Send us your inquiry and our specialist will get back to you with the answer.