Foam Adhesive for Bricklaying
Description
Foam Adhesive for Bricklaying is an alternative for cement-based thin bed mortars. It is suitable for bonding a wide range of calibrated materials such as autoclaved aerated concrete, calibrated ceramic bricks and silicate blocks.
Hoiatus: Järgige igal juhul toote etiketil esitatud teavet.
Benefits
24 h – full wall resistance
Stronger than traditional mortars
Resistant against fire and seismic activity
Reduction of thermal bridges
Hundreds of years of durability
Cleaner and faster bricklaying
Tested and approved for: AAC, calibrated ceramic and silicate block
Can be applied in below zero temperatures
Applications
Load bearing walls
Partition walls
Cellular concrete, calibrated ceramic bricks and silicate blocks
Technical parameters
Yield:
up to 12 m²
Application temperature:
-10°C to +30°C
Can temperature:
+10°C to +30°C
Initial cure:
2 h
Full cure time:
24 h
Correction time:
≤ 3 min
Coefficient of thermal conductivity:
(λ) < 0,036 W/mK
Logistics
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Foam Adhesive for Bricklaying | 870 ml | Can | 12 | 624 |
Sarnased kategoorias
IS13 Fast Adhesive for ETICS
Loe rohkem
Roof Gun Foam Adhesive
Loe rohkem
100 m² in 1 hour
![DRYWALL SYSTEM]()
Lisa võrdlemiseks
Eemalda
Toode teisest kategooriast. Ei saa võrrelda.
Foam Adhesive for Drywall
DRYWALL SYSTEM
Loe rohkem
Foam Adhesive for Bricklaying
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.