Standard Tile Adhesive
Description
Tile Adhesive Standard is suitable for fixing wall and floor ceramic tiles exposed to typical low loads. It is designed for application onto a rigid substrate, indoors.
Hoiatus: Järgige igal juhul toote etiketil esitatud teavet.
Benefits
For M format tiles
Frost and water-resistant
Applications
For small and medium format ceramic tiles
For wall and ceramic tiles – glazed and terracotta
Technical parameters
Mixing ratio:
approx. 5.5–6 l of water per 25 kg of dry mortar
Mortar ready-for-use time after mixing with water:
up to 3 h
Application temperature:
+5°C to +25°C
Open time:
20 min
Correction time:
10 min
Grouting walls/floors:
after 12/24 h
Partial/full usage:
3/14 days
Flow:
≤ 0.5 mm
Approximate consumption for 1 mm thickness:
approx. 1.5 kg/m²
Layer thickness:
2–8 mm
EN 12004 C1 T
Logistic table
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Standard Tile Adhesive | 25 kg | Bag | 48 |
Sarnased kategoorias
IS11 Adhesive Mortar for Polystyrene
Loe rohkem
IS12 Adhesive Mortar for Mineral Wool
Loe rohkem
IS23 Special Adhesive for Mesh
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.