IS11 Adhesive Mortar for Polystyrene
Description
Adhesive Mortar for Polystyrene (EPS) is a cement based adhesive part of certified system for ETICS. Designed to bond EPS (expanded polystyrene) boards in Tytan ETICS EPS. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Benefits
Flexible
Good adhesion to EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Technical parameters
Mixing ratio (water per bag):
approx. 5,0- 5,5 l per 25 kg
Consumption:
3,5-4,5 kg/m²
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS-boards:
between layers after ageing: ≥ 0,08 MPa
Logistic table
Product name
Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid.
IS11 Adhesive Mortar for Polystyrene
Content
25 kg
Packaging
Bag
Pieces per pallet
48
Colours
Grey
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS11 Adhesive Mortar for Polystyrene | 25 kg | Bag | 48 | Grey |
Sarnased kategoorias
IS11 Adhesive Mortar for Polystyrene
Loe rohkem
IS12 Adhesive Mortar for Mineral Wool
Loe rohkem
IS23 Special Adhesive for Mesh
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.