Gres Elastified Tile Adhesive
Description
Tile Adhesive Gres for fixing wall and floor tiles: stoneware and ceramic, for typical loads. Suitable for interior and exterior use.
Hoiatus: Järgige igal juhul toote etiketil esitatud teavet.
Benefits
For gres and ceramic tiles
More flexible
Frost and water-resistant
Enables laying tiles from the top
Application
For fixing wall and floor tiles up to 35 x 35 cm
Especially recommended for glazed tiles
For interior and exterior use
Technical parameters
Mixing ratio:
6.0–6.5 l of water per 25 kg of dry mortar
Mortar ready-for-use time after mixing with water:
up to 3 h
Application temperature:
+5°C to +25°C
Open time:
30 min
Correction time:
30 min
Grouting walls:
after 12 h
Grouting floors:
after 24 h
Partial/full usage:
after 3/14 days
Flow:
≤ 0.5 mm
Approximate consumption for 1 mm thickness:
approx. 1.5 kg/m²
Layer thickness:
2–10 mm
EN 12004 C1 TE
Logistic table
| Product name Vastavatele tootevariantidele määratud unikaalne kood, mis määrab kindlaks nende mahutavuse, suuruse ja värvid. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Gres Elastified Tile Adhesive | 25 kg | Bag | 48 |
Sarnased kategoorias
IS11 Adhesive Mortar for Polystyrene
Loe rohkem
IS12 Adhesive Mortar for Mineral Wool
Loe rohkem
IS23 Special Adhesive for Mesh
Loe rohkem
Kas teil on toote kohta küsimusi?
Ei leidnud veebisaidilt infot, soovite rohkem teada?
Saada meile oma päring ja meie spetsialist vastab teile.