Foam Adhesive for Bricklaying
Description
Foam Adhesive for Bricklaying is an alternative for cement-based thin bed mortars. It is suitable for bonding a wide range of calibrated materials such as autoclaved aerated concrete, calibrated ceramic bricks and silicate blocks.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
24 h – full wall resistance
Stronger than traditional mortars
Resistant against fire and seismic activity
Reduction of thermal bridges
Hundreds of years of durability
Cleaner and faster bricklaying
Tested and approved for: AAC, calibrated ceramic and silicate block
Can be applied in below zero temperatures
Applications
Load bearing walls
Partition walls
Cellular concrete, calibrated ceramic bricks and silicate blocks
Technical parameters
Yield:
up to 12 m²
Application temperature:
-10°C to +30°C
Can temperature:
+10°C to +30°C
Initial cure:
2 h
Full cure time:
24 h
Correction time:
≤ 3 min
Coefficient of thermal conductivity:
(λ) < 0,036 W/mK
Logistics
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Foam Adhesive for Bricklaying | 870 ml | Can | 12 | 624 |
Similar in category
IS13 Fast Adhesive for ETICS
Læs mere
Roof Gun Foam Adhesive
Læs mere
100 m² in 1 hour
![DRYWALL SYSTEM]()
Tilføj til sammenligning
Fjern
Et produkt fra en anden kategori. Kan ikke sammenlignes.
Foam Adhesive for Drywall
DRYWALL SYSTEM
Læs mere
Foam Adhesive for Bricklaying
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.