Starter
Description
Scratch Coat is a cement based mortar applied directly onto the substrate before the application of finish layer of Tytan Building System. It is recommended for the mineral substrate preparation which will receive cement-lime plaster machine or manually applied. It improves the plaster adhesion to walls and ceilings, and levels the substrate absorption.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Improves the adhesion to substrate
Increases the efficiency of the next layer
Vapour permeable
For mechanical or manual application
Technical parameters
Mixing ratio with water:
5,5–6,0 l for 25 kg of dry blend
Aggregate size:
up to 1,0 mm
Application temperature:
+5°C to +25°C
Compressive strength:
CS IV
Flexural strength:
≥ 2 MPa
Consumption:
4–8 kg/m²
Consumption time:
max. 3 h
Colour:
natural grey
EN 998-1 TYPE GP, CSIV, W2
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Starter | 25 kg | Bag | 48 |
Similar in category
Mur 2-10 Thin Bed Mortar
Læs mere
Starter
Læs mere
LTM 20
Læs mere
Brick 5-25 Clinker Mortar
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.