IS55 / IS55N SISI Hybrid Facade Plaster
Description
SISI Hybrid plaster based on silicate-silicone dispersion with high quality fillers and pigments which cause pearl like effect of water after wetting. When fully cured it creates a vapor- ermeable, elastic and weather-resistant coating. The structure of the coating ensures fast moisture evaporation from the substrate and at the same time creates efficient protection against the substrate moisture and humidity.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Breathable – vapour permeable
Hydrophobic
User friendly – easy-to-use (manual, spray applied)
Resistant to biological corrosion
Colour safe – ready-to-use in thousands of colours
Low consumption
Resistant to weather conditions
Homogenous structure – excellent covering-up properties
Based on silicate-silicone dispersion
Applications
SISI Hybrid plaster is intended for coating exterior<br />
and internal substrates. It can be used as a finishing layer in Tytan Insulation Systems. Creates a protective and decorative coating
Technical parameters
Temperature of application (surface, air, materials):
+7°C to +25°C
Adhesion:
≥0,3 MPa
Vapour permeability, grade:
V2
Water absorption, grade:
W2
Consumption:
2,1-4,0 kg/m²
Volume density:
1,85 kg/dm³
Shelf-life:
12 months
Drying time:
ca. 12-24 h depending on weather conditions
Colour:
available in full range of Tytan Colour Collection or provided pattern
EN 15824 and ETA-16/0161, ETA-16/0166
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| IS55 / IS55N SISI Hybrid Facade Plaster | 25 kg | Bucket | 24 |
Similar in category
Mur 2-10 Thin Bed Mortar
Læs mere
Starter
Læs mere
LTM 20
Læs mere
Brick 5-25 Clinker Mortar
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.