IS22 Fibre-Reinforced Mortar
Description
Fibre-Reinforced Mortar is designed to bond EPS (expanded polystyrene) and mineral wool boards and form reinforcing layers in Tytan Insulation System on perimeter walls of buildings, as well as to patch and smooth down the substrate for thin-coat decorative plasters.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Reinforced with fibres – unique FiberGel combination
High adhesion to mineral substrates, EPS and mineral wool boards
Resistant to extreme mechanical loads and thermal stresses
Highly impact resistant
Flexible and durable
Vapour permeable
Resistant to scratches and cracks
Resistant to weather conditions
External and internal walls
Pot life of a water mix: up to 2 h
Frost resistant when set
Technical parameters
Mixing ratio (water per bag):
approx. 5,5 - 7,5 l per 25 kg
Approximate consumption:
3-6 kg/m²
Reinforcing layer thickness:
3-5 mm
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +35°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to the insulating material boards:
after ageing: ≥0,08
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS22 Fibre Reinforced Mortar | 25 kg | Bag | 48 | Grey |
Similar in category
Mur 2-10 Thin Bed Mortar
Læs mere
Starter
Læs mere
LTM 20
Læs mere
Brick 5-25 Clinker Mortar
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.