IS21 Adhesive & Reinforcement Mortar
Description
Adhesive & Reinforcement Mortar is designed to bond EPS (expanded polystyrene) boards and to form reinforcing layers in Tytan Insulation Systems. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Flexible
High adhesion to mineral substrates and EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Frost resistant after set
Pot life of a water mix: up to 2 h
Technical parameters
Mixing ratio (water per bag):
approx. 5,25-5,5 l per 25 kg
Consumption (dry mix):
3,5-5,5 kg/m²
Consumption (in the reinforced layer):
4,0-5,5 kg/m²
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS boards:
between layers after ageing: ≥0,08
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS21 Adhesive & Reinforcement Mortar | 25 kg | Bag | 48 | Grey |
Similar in category
Mur 2-10 Thin Bed Mortar
Læs mere
Starter
Læs mere
LTM 20
Læs mere
Brick 5-25 Clinker Mortar
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.