Standard Tile Adhesive
Description
Tile Adhesive Standard is suitable for fixing wall and floor ceramic tiles exposed to typical low loads. It is designed for application onto a rigid substrate, indoors.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
For M format tiles
Frost and water-resistant
Applications
For small and medium format ceramic tiles
For wall and ceramic tiles – glazed and terracotta
Technical parameters
Mixing ratio:
approx. 5.5–6 l of water per 25 kg of dry mortar
Mortar ready-for-use time after mixing with water:
up to 3 h
Application temperature:
+5°C to +25°C
Open time:
20 min
Correction time:
10 min
Grouting walls/floors:
after 12/24 h
Partial/full usage:
3/14 days
Flow:
≤ 0.5 mm
Approximate consumption for 1 mm thickness:
approx. 1.5 kg/m²
Layer thickness:
2–8 mm
EN 12004 C1 T
Logistics
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Standard Tile Adhesive | 25 kg | Bag | 48 |
Similar in category
IS11 Adhesive Mortar for Polystyrene
Læs mere
IS12 Adhesive Mortar for Mineral Wool
Læs mere
IS23 Special Adhesive for Mesh
Læs mere
MS FIX Panel
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.