IS23 Special Adhesive for Mesh
Description
Adhesive and Reinforced Render is designed to bond EPS and mineral wool boards and to form reinforcing layers in Tytan Insulation System. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS. If used with reinforcing mesh, the mortar provides a perfect solution for renovation of old plasterwork and for fixing damaged or cracked existing insulation systems.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Based on white cement
Reinforced with FiberGel technology – unique fibre combination
High adhesion to mineral substrates, EPS and mineral wool boards
Resistant to extreme mechanical loads and thermal stresses
Highly impact resistant
Flexible and durable
Vapour permeable
Resistant to scratches and cracks
Resistant to weather conditions
External and internal walls
Frost resistant
Pot life of a water mix: up to 2 h
Technical parameters
Mixing ratio (water per bag):
5,5 l - 7,5 l per 25 kg
Consumption (dry mix):
3,5-5,5 kg/m²
Consumption (in the reinforced layer):
4,0-5,5 kg/m²
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +35°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to the insulating material boards between layers after ageing:
≥0,08
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS23 Special Adhesive for Mesh | 25 kg | Bag | 48 | White |
Similar in category
IS11 Adhesive Mortar for Polystyrene
Læs mere
IS12 Adhesive Mortar for Mineral Wool
Læs mere
IS23 Special Adhesive for Mesh
Læs mere
MS FIX Panel
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.