IS12 Adhesive Mortar for Mineral Wool
Description
Adhesive Mortar for Mineral Wool is designed to bond mineral wool boards in in thermal insulation system Tytan ETICS EPS and Tytan ETICS MW. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Benefits
Flexible
Good adhesion to mineral wool boards
Highly vapour permeable
Resistant to weather conditions
External and internal walls
Technical parameters
Mixing ratio (water per bag):
approx. 5,0-5,5 l per 25 kg
Consumption:
3,5-4,5 kg/m²
emperature of application:
+5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2 h
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS-boards:
between layers after ageing: ≥ 0,08 MPa
Logistic table
Product name
En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver.
IS12 Adhesive Mortar for Mineral Wool
Content
25 kg
Packaging
Bag
Pieces per pallet
48
Colours
Grey
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS12 Adhesive Mortar for Mineral Wool | 25 kg | Bag | 48 | Grey |
Similar in category
IS11 Adhesive Mortar for Polystyrene
Læs mere
IS12 Adhesive Mortar for Mineral Wool
Læs mere
IS23 Special Adhesive for Mesh
Læs mere
MS FIX Panel
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.