IS11 Adhesive Mortar for Polystyrene
Description
Adhesive Mortar for Polystyrene (EPS) is a cement based adhesive part of certified system for ETICS. Designed to bond EPS (expanded polystyrene) boards in Tytan ETICS EPS. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Flexible
Good adhesion to EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Technical parameters
Mixing ratio (water per bag):
approx. 5,0- 5,5 l per 25 kg
Consumption:
3,5-4,5 kg/m²
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS-boards:
between layers after ageing: ≥ 0,08 MPa
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS11 Adhesive Mortar for Polystyrene | 25 kg | Bag | 48 | Grey |
Similar in category
IS11 Adhesive Mortar for Polystyrene
Læs mere
IS12 Adhesive Mortar for Mineral Wool
Læs mere
IS23 Special Adhesive for Mesh
Læs mere
MS FIX Panel
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.