Gres Elastified Tile Adhesive
Description
Tile Adhesive Gres for fixing wall and floor tiles: stoneware and ceramic, for typical loads. Suitable for interior and exterior use.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
For gres and ceramic tiles
More flexible
Frost and water-resistant
Enables laying tiles from the top
Application
For fixing wall and floor tiles up to 35 x 35 cm
Especially recommended for glazed tiles
For interior and exterior use
Technical parameters
Mixing ratio:
6.0–6.5 l of water per 25 kg of dry mortar
Mortar ready-for-use time after mixing with water:
up to 3 h
Application temperature:
+5°C to +25°C
Open time:
30 min
Correction time:
30 min
Grouting walls:
after 12 h
Grouting floors:
after 24 h
Partial/full usage:
after 3/14 days
Flow:
≤ 0.5 mm
Approximate consumption for 1 mm thickness:
approx. 1.5 kg/m²
Layer thickness:
2–10 mm
EN 12004 C1 TE
Logistic table
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Gres Elastified Tile Adhesive | 25 kg | Bag | 48 |
Similar in category
IS11 Adhesive Mortar for Polystyrene
Læs mere
IS12 Adhesive Mortar for Mineral Wool
Læs mere
IS23 Special Adhesive for Mesh
Læs mere
MS FIX Panel
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.