FIX² GT Mounting Adhesive
Description
Fast curing and very strong hybrid-based mounting adhesive. Indispensable in a situation where we expect a rapid bonding effect (when we want to quickly use bonded elements). It forms a very strong bond that can be loaded after about 30 minutes after application, and reaches its full strength in about 3 hours. The resulting joint fully damps vibrations, and is resistant to weather, UV radiation and diluted chemicals.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Cures 8 x faster than other traditional mounting adhesives
Can be loaded after 30 min
Very high bonding strength: up to 400 kg / 10 cm²
Bonds all materials
Contains 2 applicators, one with a thin nozzle for more precise application, the second for heavy and massive elements
Can be used on a damp substrate
Moisture resistant
For interior and exterior use
Ecological: does not contain solvents, silicones or isocyanates
Neutral: does not corrode metals, does not damage sensitive surfaces
The joint can be painted
Easy to extrude
Low VOC emission
Applications
Bonding mirrors with no need of tapes or additional support
Bonding a wide range of finishing materials to typical surfaces such as: concrete, plaster, chipboard, wood, brick and glass
Bonding skirting boards, pedestals, thresholds, panels and ceramic tiles
Bonding decorative elements of wood, cork, chipboard, metal, stone, laminates, expanded polystyrene (EPS) and marble
Bonding plastics (except PE, PP and Teflon)
Technical parameters
Colour:
white
Correction time:
10 min
Full curing time:
3 h
Application temperature:
+5°C to +30°C
Temperature resistance after curing:
-30°C to +90°C
Similar in category
IS11 Adhesive Mortar for Polystyrene
Læs mere
IS12 Adhesive Mortar for Mineral Wool
Læs mere
IS23 Special Adhesive for Mesh
Læs mere
MS FIX Panel
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.