Evomer Fast Primer
Description
Fast Drying Bitumen-Polymer Primer
Evomer Fast Primer is an innovative bitumen-polymer fast drying solution intended for preparing the roof surface before installation of roofing and waterproofing materials. Due to the introduction of polymerization technology, the primer features perfect adhesion and ensures full surface stability. Evomer Fast Primer does not contain any organic solvents, so it is non-flammable and is safe for both polystyrene and the environment.
Advarsel: Følg altid anvisningerne på produktets etiket.
Benefits
Drying time within 20 min only
High yield
Safe (non-flammable, no solvents)
Applications
Preparation of mineral, bitumen, wooden and steel surfaces prior to the installation of waterproof membranes
Technical parameters
Consistency:
liquid, homogeneous, without inclusions
Drying temperature +23°C / 50% RH on concrete:
20 min
Drying temperature +5°C / 50% RH on concrete:
60 min
Drying temperature +23°C / 50% RH on non-absorbing surfaces (steel, roof felt):
30 min
Application temperature:
+5°C to +35°C
Elasticity at low temperature (cold bending):
-20°C
Vertical flow resistance at increased temperature:
+90°C
Logistics
| Product name En unik kode, der er tildelt de respektive produktvarianter, og som angiver deres kapacitet, størrelse og farver. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Evomer Fast Primer | 9 kg | Bucket | 44 |
| Evomer Fast Primer | 18 kg | Bucket | 27 |
Similar in category
Water Stop Plastic Bitumen Sealing
Læs mere
Tack-R KMB 2K
Læs mere
Aqua Protect Polyurethane-Bituminous Resin
Læs mere
Alubit Reflex Protective Roof Coating
Læs mere
Har du spørgsmål om produktet?
Fandt du ikke oplysningerne på hjemmesiden, vil du vide mere?
Send os din forespørgsel, og vores specialist vil vende tilbage til dig med et svar.