Foam Adhesive for Bricklaying
Description
Foam Adhesive for Bricklaying is an alternative for cement-based thin bed mortars. It is suitable for bonding a wide range of calibrated materials such as autoclaved aerated concrete, calibrated ceramic bricks and silicate blocks.
Įspėjimas: Visais atvejais laikykitės informacijos, pateiktos ant produkto etiketės.
Benefits
24 h – full wall resistance
Stronger than traditional mortars
Resistant against fire and seismic activity
Reduction of thermal bridges
Hundreds of years of durability
Cleaner and faster bricklaying
Tested and approved for: AAC, calibrated ceramic and silicate block
Can be applied in below zero temperatures
Applications
Load bearing walls
Partition walls
Cellular concrete, calibrated ceramic bricks and silicate blocks
Technical parameters
Yield:
up to 12 m²
Application temperature:
-10°C to +30°C
Can temperature:
+10°C to +30°C
Initial cure:
2 h
Full cure time:
24 h
Correction time:
≤ 3 min
Coefficient of thermal conductivity:
(λ) < 0,036 W/mK
Logistics
| Product name Atitinkamiems gaminio variantams priskirtas unikalus kodas, nurodantis jų talpą, dydį ir spalvas. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Foam Adhesive for Bricklaying | 870 ml | Can | 12 | 624 |
Panašios kategorijos
Styro 753 Foam Adhesive
Skaityti daugiau
60 Seconds Fast Universal Foam Adhesive
Skaityti daugiau
100 m² in 1 hour
![DRYWALL SYSTEM]()
Pridėti palyginimui
Pašalinti
Produktas iš kitos kategorijos. Negalima lyginti.
Foam Adhesive for Drywall
DRYWALL SYSTEM
Skaityti daugiau
Turite klausimų apie produktą?
Neradote informacijos svetainėje, norite sužinoti daugiau?
Siųskite mums savo užklausą ir mūsų specialistas susisieks su jumis su atsakymu.