Description
High-quality gun polyurethane foam offering the highest yield – up to 65 l and low post-expansion. Comfortable work and excellent sound insulation.
						
						Įspėjimas: Visais atvejais laikykitės informacijos, pateiktos ant produkto etiketės.					
							Benefits
						High yield – up to 65 l
						
					
						The optimal price for window insulation
						
					
						External noise reduction 63 dB
						
					
						Stable and durable window insulation
						
					
						Convenient work thanks to even expansion, increasing the numbers of windows and doors installed per can on the market (30% more windows installed vs.standard foam)
						
					
						Short curing time
						
					
						Low post-expansion
						
					
						Low pressure formulation (prevents bowing of door and window frames)
						
					
						Does not emit MDI vapours during application**
						
					
						M1 emission class for building material***
						
					Applications
						Mounting of windows
						
					
						Thermal and acoustic insulation
						
					
						Filling and sealing of cracks, gaps and pipe ducts
						
					Technical parameters
						Yield:					
					
						up to 65 l					
										
						Cutting time:					
					
						≤ 30 min****					
										
						Application temperature: 					
					
						-20°C to +30°C					
										
						Can temperature:					
					
						+5°C to +30°C					
										
						Shelf life:					
					
						12 months					
										
						**	Lack of MDI emission was certified by the Swedish SP Proving Forskning Institute.					
										
						***	Product classified by the Building Information Foundation, RTS, as an M1 class building material. Once cured, it does not emit any hazardous substances. All the parameters were measured in compliance with Selena’s internal standards and depend heavily on external curing conditions, equipment quality and adhering to the application instructions. The parameters were measured under standard laboratory conditions: +23°C and 50% RH.					
										
						****	30 minute cutting time and full hardening after 24 h can be achieved by “wet” application, i.e. by wetting the surface with a water mist before application and foam immediately after application at a temperature of min. +20°C for joints up to 3 cm.					
					 
				Logistic table
| Product name Atitinkamiems gaminio variantams priskirtas unikalus kodas, nurodantis jų talpą, dydį ir spalvas. | Content | Packaging | Pieces per box | Pieces per pallet | 
|---|---|---|---|---|
| 65 | 750 ml | Can | 12 | 624 | 
Turite klausimų apie produktą?
Neradote informacijos svetainėje, norite sužinoti daugiau?
Siųskite mums savo užklausą ir mūsų specialistas susisieks su jumis su atsakymu.