Starter
Description
Scratch Coat is a cement based mortar applied directly onto the substrate before the application of finish layer of Tytan Building System. It is recommended for the mineral substrate preparation which will receive cement-lime plaster machine or manually applied. It improves the plaster adhesion to walls and ceilings, and levels the substrate absorption.
Упозорење: Увек пратите информације на етикети производа.
Benefits
Improves the adhesion to substrate
Increases the efficiency of the next layer
Vapour permeable
For mechanical or manual application
Technical parameters
Mixing ratio with water:
5,5–6,0 l for 25 kg of dry blend
Aggregate size:
up to 1,0 mm
Application temperature:
+5°C to +25°C
Compressive strength:
CS IV
Flexural strength:
≥ 2 MPa
Consumption:
4–8 kg/m²
Consumption time:
max. 3 h
Colour:
natural grey
EN 998-1 TYPE GP, CSIV, W2
Logistic table
| Product name Jedinstveni kod dodeljen odgovarajućim varijantama proizvoda, koji specificira njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Starter | 25 kg | Bag | 48 |
Slično u kategoriji
Mur 2-10 Thin Bed Mortar
Pročitaj više
Brick 5-25 Clinker Mortar
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na veb sajtu, želite li da saznate više?
Pošaljite nam vaš upit i naš specijalista će vam odgovoriti.