IS21 Adhesive & Reinforcement Mortar
Description
Adhesive & Reinforcement Mortar is designed to bond EPS (expanded polystyrene) boards and to form reinforcing layers in Tytan Insulation Systems. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Упозорење: Увек пратите информације на етикети производа.
Benefits
Flexible
High adhesion to mineral substrates and EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Frost resistant after set
Pot life of a water mix: up to 2 h
Technical parameters
Mixing ratio (water per bag):
approx. 5,25-5,5 l per 25 kg
Consumption (dry mix):
3,5-5,5 kg/m²
Consumption (in the reinforced layer):
4,0-5,5 kg/m²
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS boards:
between layers after ageing: ≥0,08
Logistic table
| Product name Jedinstveni kod dodeljen odgovarajućim varijantama proizvoda, koji specificira njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS21 Adhesive & Reinforcement Mortar | 25 kg | Bag | 48 | Grey |
Slično u kategoriji
Mur 2-10 Thin Bed Mortar
Pročitaj više
Brick 5-25 Clinker Mortar
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na veb sajtu, želite li da saznate više?
Pošaljite nam vaš upit i naš specijalista će vam odgovoriti.