Standard Tile Adhesive
Description
Tile Adhesive Standard is suitable for fixing wall and floor ceramic tiles exposed to typical low loads. It is designed for application onto a rigid substrate, indoors.
Упозорење: Увек пратите информације на етикети производа.
Benefits
For M format tiles
Frost and water-resistant
Applications
For small and medium format ceramic tiles
For wall and ceramic tiles – glazed and terracotta
Technical parameters
Mixing ratio:
approx. 5.5–6 l of water per 25 kg of dry mortar
Mortar ready-for-use time after mixing with water:
up to 3 h
Application temperature:
+5°C to +25°C
Open time:
20 min
Correction time:
10 min
Grouting walls/floors:
after 12/24 h
Partial/full usage:
3/14 days
Flow:
≤ 0.5 mm
Approximate consumption for 1 mm thickness:
approx. 1.5 kg/m²
Layer thickness:
2–8 mm
EN 12004 C1 T
Logistic table
| Product name Jedinstveni kod dodeljen odgovarajućim varijantama proizvoda, koji specificira njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Standard Tile Adhesive | 25 kg | Bag | 48 |
Slično u kategoriji
IS11 Adhesive Mortar for Polystyrene
Pročitaj više
IS12 Adhesive Mortar for Mineral Wool
Pročitaj više
IS23 Special Adhesive for Mesh
Pročitaj više
MS FIX Panel
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na veb sajtu, želite li da saznate više?
Pošaljite nam vaš upit i naš specijalista će vam odgovoriti.