IS11 Adhesive Mortar for Polystyrene
Description
Adhesive Mortar for Polystyrene (EPS) is a cement based adhesive part of certified system for ETICS. Designed to bond EPS (expanded polystyrene) boards in Tytan ETICS EPS. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Benefits
Flexible
Good adhesion to EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Technical parameters
Mixing ratio (water per bag):
approx. 5,0- 5,5 l per 25 kg
Consumption:
3,5-4,5 kg/m²
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS-boards:
between layers after ageing: ≥ 0,08 MPa
Logistic table
Product name
Jedinstveni kod dodeljen odgovarajućim varijantama proizvoda, koji specificira njihov kapacitet, veličinu i boje.
IS11 Adhesive Mortar for Polystyrene
Content
25 kg
Packaging
Bag
Pieces per pallet
48
Colours
Grey
| Product name Jedinstveni kod dodeljen odgovarajućim varijantama proizvoda, koji specificira njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS11 Adhesive Mortar for Polystyrene | 25 kg | Bag | 48 | Grey |
Slično u kategoriji
IS11 Adhesive Mortar for Polystyrene
Pročitaj više
IS12 Adhesive Mortar for Mineral Wool
Pročitaj više
IS23 Special Adhesive for Mesh
Pročitaj više
MS FIX Panel
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na veb sajtu, želite li da saznate više?
Pošaljite nam vaš upit i naš specijalista će vam odgovoriti.