Gres Elastified Tile Adhesive
Description
Tile Adhesive Gres for fixing wall and floor tiles: stoneware and ceramic, for typical loads. Suitable for interior and exterior use.
Упозорење: Увек пратите информације на етикети производа.
Benefits
For gres and ceramic tiles
More flexible
Frost and water-resistant
Enables laying tiles from the top
Application
For fixing wall and floor tiles up to 35 x 35 cm
Especially recommended for glazed tiles
For interior and exterior use
Technical parameters
Mixing ratio:
6.0–6.5 l of water per 25 kg of dry mortar
Mortar ready-for-use time after mixing with water:
up to 3 h
Application temperature:
+5°C to +25°C
Open time:
30 min
Correction time:
30 min
Grouting walls:
after 12 h
Grouting floors:
after 24 h
Partial/full usage:
after 3/14 days
Flow:
≤ 0.5 mm
Approximate consumption for 1 mm thickness:
approx. 1.5 kg/m²
Layer thickness:
2–10 mm
EN 12004 C1 TE
Logistic table
| Product name Jedinstveni kod dodeljen odgovarajućim varijantama proizvoda, koji specificira njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Gres Elastified Tile Adhesive | 25 kg | Bag | 48 |
Slično u kategoriji
IS11 Adhesive Mortar for Polystyrene
Pročitaj više
IS12 Adhesive Mortar for Mineral Wool
Pročitaj više
IS23 Special Adhesive for Mesh
Pročitaj više
MS FIX Panel
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na veb sajtu, želite li da saznate više?
Pošaljite nam vaš upit i naš specijalista će vam odgovoriti.