Foam Adhesive for Bricklaying
Description
Foam Adhesive for Bricklaying is an alternative for cement-based thin bed mortars. It is suitable for bonding a wide range of calibrated materials such as autoclaved aerated concrete, calibrated ceramic bricks and silicate blocks.
Brīdinājums: Jebkurā gadījumā rīkojieties saskaņā ar informāciju uz produkta etiķetes.
Benefits
24 h – full wall resistance
Stronger than traditional mortars
Resistant against fire and seismic activity
Reduction of thermal bridges
Hundreds of years of durability
Cleaner and faster bricklaying
Tested and approved for: AAC, calibrated ceramic and silicate block
Can be applied in below zero temperatures
Applications
Load bearing walls
Partition walls
Cellular concrete, calibrated ceramic bricks and silicate blocks
Technical parameters
Yield:
up to 12 m²
Application temperature:
-10°C to +30°C
Can temperature:
+10°C to +30°C
Initial cure:
2 h
Full cure time:
24 h
Correction time:
≤ 3 min
Coefficient of thermal conductivity:
(λ) < 0,036 W/mK
Logistics
| Product name Unikāls kods, kas piešķirts attiecīgajiem produktu variantiem, norādot to ietilpību, izmēru un krāsu. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Foam Adhesive for Bricklaying | 870 ml | Can | 12 | 624 |
Līdzīgs kategorijā
IS13 Fast Adhesive for ETICS
Lasīt vairāk
Roof Gun Foam Adhesive
Lasīt vairāk
100 m² in 1 hour
![DRYWALL SYSTEM]()
Pievienot salīdzināšanai
Noņemt
Produkts no citas kategorijas. To nevar salīdzināt.
Foam Adhesive for Drywall
DRYWALL SYSTEM
Lasīt vairāk
Foam Adhesive for Bricklaying
Lasīt vairāk
Vai jums ir jautājumi par produktu?
Neatradāt informāciju vietnē, vēlaties uzzināt vairāk?
Sūtiet mums jūsu jautājumu, un mūsu speciālists atbildēs jums ar atbildi.