Wood effect system
Description
Wood Effect Plaster created based on white cement, mineral fillers, and aggregate. Product plasticity and its working time were designed to support decorative works on facades, especially effects imitating wood. Special additives make the plaster easier to apply. When fully cured, it creates a breathable, strong, and durable coating that can be stained to achieve the expected colour of the wood.
Brīdinājums: Jebkurā gadījumā rīkojieties saskaņā ar informāciju uz produkta etiķetes.
Benefits
High plasticity and prolonged open time of the product supports in structuring the wood effect
Resistance to mechanical damage and microcracks
Resistant to biological corrosion
Good protection against moisture
To be staining for a more natural wood effect
Applications
For exterior and interior structural plaster effects
Applied on all seasoned, even, and load-bearing construction surfaces
Finishing layer in TYTAN ETICS EPS and TYTAN ETICS MW thermal insulation systems
Creates a protective and decorative surface coat for modelling the structure of natural wood
Technical parameters
Colour:
white
Mixing ratio (water per bag):
5,25÷5,5 l per 25 kg
Adhesion:
≥ 0,3 MPa
Vapour permeability, grade:
V1
Water absorption, grade:
W2
Consumption:
2,2-4,2 kg/m²
Painting:
after 3 days
Shelf-life:
12 months
emperature of application:
from +5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Logistic table
| Product name Unikāls kods, kas piešķirts attiecīgajiem produktu variantiem, norādot to ietilpību, izmēru un krāsu. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Wood Effect Plaster | 25 kg | Bag | 48 |
Līdzīgs kategorijā
Mur 2-10 Thin Bed Mortar
Lasīt vairāk
Starter
Lasīt vairāk
LTM 20
Lasīt vairāk
Brick 5-25 Clinker Mortar
Lasīt vairāk
Vai jums ir jautājumi par produktu?
Neatradāt informāciju vietnē, vēlaties uzzināt vairāk?
Sūtiet mums jūsu jautājumu, un mūsu speciālists atbildēs jums ar atbildi.