IS22 Fibre-Reinforced Mortar
Description
Fibre-Reinforced Mortar is designed to bond EPS (expanded polystyrene) and mineral wool boards and form reinforcing layers in Tytan Insulation System on perimeter walls of buildings, as well as to patch and smooth down the substrate for thin-coat decorative plasters.
Brīdinājums: Jebkurā gadījumā rīkojieties saskaņā ar informāciju uz produkta etiķetes.
Benefits
Reinforced with fibres – unique FiberGel combination
High adhesion to mineral substrates, EPS and mineral wool boards
Resistant to extreme mechanical loads and thermal stresses
Highly impact resistant
Flexible and durable
Vapour permeable
Resistant to scratches and cracks
Resistant to weather conditions
External and internal walls
Pot life of a water mix: up to 2 h
Frost resistant when set
Technical parameters
Mixing ratio (water per bag):
approx. 5,5 - 7,5 l per 25 kg
Approximate consumption:
3-6 kg/m²
Reinforcing layer thickness:
3-5 mm
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +35°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to the insulating material boards:
after ageing: ≥0,08
Logistic table
| Product name Unikāls kods, kas piešķirts attiecīgajiem produktu variantiem, norādot to ietilpību, izmēru un krāsu. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS22 Fibre Reinforced Mortar | 25 kg | Bag | 48 | Grey |
Līdzīgs kategorijā
Mur 2-10 Thin Bed Mortar
Lasīt vairāk
Starter
Lasīt vairāk
LTM 20
Lasīt vairāk
Brick 5-25 Clinker Mortar
Lasīt vairāk
Vai jums ir jautājumi par produktu?
Neatradāt informāciju vietnē, vēlaties uzzināt vairāk?
Sūtiet mums jūsu jautājumu, un mūsu speciālists atbildēs jums ar atbildi.