IS21 Adhesive & Reinforcement Mortar
Description
Adhesive & Reinforcement Mortar is designed to bond EPS (expanded polystyrene) boards and to form reinforcing layers in Tytan Insulation Systems. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Brīdinājums: Jebkurā gadījumā rīkojieties saskaņā ar informāciju uz produkta etiķetes.
Benefits
Flexible
High adhesion to mineral substrates and EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Frost resistant after set
Pot life of a water mix: up to 2 h
Technical parameters
Mixing ratio (water per bag):
approx. 5,25-5,5 l per 25 kg
Consumption (dry mix):
3,5-5,5 kg/m²
Consumption (in the reinforced layer):
4,0-5,5 kg/m²
Reinforcing layer thickness:
3-5 mm
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS boards:
between layers after ageing: ≥0,08
Logistic table
| Product name Unikāls kods, kas piešķirts attiecīgajiem produktu variantiem, norādot to ietilpību, izmēru un krāsu. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS21 Adhesive & Reinforcement Mortar | 25 kg | Bag | 48 | Grey |
Līdzīgs kategorijā
Mur 2-10 Thin Bed Mortar
Lasīt vairāk
Starter
Lasīt vairāk
LTM 20
Lasīt vairāk
Brick 5-25 Clinker Mortar
Lasīt vairāk
Vai jums ir jautājumi par produktu?
Neatradāt informāciju vietnē, vēlaties uzzināt vairāk?
Sūtiet mums jūsu jautājumu, un mūsu speciālists atbildēs jums ar atbildi.