IS11 Adhesive Mortar for Polystyrene
Description
Adhesive Mortar for Polystyrene (EPS) is a cement based adhesive part of certified system for ETICS. Designed to bond EPS (expanded polystyrene) boards in Tytan ETICS EPS. It is suitable for both new buildings and also the buildings to be thermo-renovated with ETICS.
Brīdinājums: Jebkurā gadījumā rīkojieties saskaņā ar informāciju uz produkta etiķetes.
Benefits
Flexible
Good adhesion to EPS boards
Vapour permeable
Resistant to weather conditions
External and internal walls
Technical parameters
Mixing ratio (water per bag):
approx. 5,0- 5,5 l per 25 kg
Consumption:
3,5-4,5 kg/m²
Temperature of application:
+5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Adhesion acc. ETAG 004 to EPS-boards:
between layers after ageing: ≥ 0,08 MPa
Logistic table
| Product name Unikāls kods, kas piešķirts attiecīgajiem produktu variantiem, norādot to ietilpību, izmēru un krāsu. | Content | Packaging | Pieces per pallet | Colours |
|---|---|---|---|---|
| IS11 Adhesive Mortar for Polystyrene | 25 kg | Bag | 48 | Grey |
Līdzīgs kategorijā
IS11 Adhesive Mortar for Polystyrene
Lasīt vairāk
IS12 Adhesive Mortar for Mineral Wool
Lasīt vairāk
IS23 Special Adhesive for Mesh
Lasīt vairāk
MS FIX Panel
Lasīt vairāk
Vai jums ir jautājumi par produktu?
Neatradāt informāciju vietnē, vēlaties uzzināt vairāk?
Sūtiet mums jūsu jautājumu, un mūsu speciālists atbildēs jums ar atbildi.