Energy 2020
Description
Gun Polyurethane Foam
Innovative gun polyurethane foam which eliminates thermal bridges efficiently and permanently. It reduces heat loss in joinery insulation by up to 60%*.
Perfect solution for energy-efficient buildings.
* Value based on theoretical calculations regarding energy efficiency of insulation between window frame and wall based on Energy 2020 PU foam versus standard foams of Selena Group: ITB report number 02207/13/Z00NF. Should not be associated with the energy efficiency of the entire building. More information available in technical documentation.
Benefits
Reduces heat loss in joinery insulation up to 60% (Reduced building / room operating costs; perfect for low energy buildings)
Eliminates of linear thermal Bridges
Resistant to adverse weather conditions (airtight to 1200 Pa, watertight to 1800 Pa)
Convenient work also in low temperature (till -10°C, thanks to even expansion)
External noise reduction 64 dB
Does not emit MDI during application**
** Lack of MDI emission was certified by the Swedish SP Proving Forskning Institute.
Applications
Perfect for insulation energy-efficient windows and doors
Filling in places prone to thermal bridging
Technical parameters
Heat transfer coefficient:
U ≤ 0.5 W/m²K
Air permeability:
class 4 (1 200 Pa)
Air permeability coefficient:
a < 0.01 m³/(m*h*daPa2/3)
Water tightness:
class E 1800 Pa
Water vapour permeability μ:
16
Yield:
up to 45 l
Cutting time:
≤ 30 min****
Application temperature:
-10°C to +35°C
Can temperature:
+5°C to +30°C
Shelf life:
18 months
*** Product classified by the Building Information Foundation, RTS, as an M1 class building material. Once cured, it does not emit any hazardous substances. All the parameters were measured in compliance with Selena’s internal standards and depend heavily on external curing conditions, equipment quality and adhering to the application instructions. The parameters were measured under standard laboratory conditions: +23°C and 50% RH.
**** 30 minute cutting time and full hardening after 24 h can be achieved by “wet” application, i.e. by wetting the surface with a water mist before application and foam immediately after application at a temperature of min. +20°C for joints up to 3 cm.
Logistics
Product name
Jedinstvena šifra dodijeljena odgovarajućim varijantama proizvoda, specificirajući njihov kapacitet, veličinu i boje.
Energy 2020
Content
750 ml
Packaging
Can
Pieces per box
12
Pieces per pallet
624
| Product name Jedinstvena šifra dodijeljena odgovarajućim varijantama proizvoda, specificirajući njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Energy 2020 | 750 ml | Can | 12 | 624 |
Slično u kategoriji
NEW ON THE MARKET
Dodaj za usporedbu
Ukloni
Proizvod iz druge kategorije. Ne može se usporediti.
LOW-EX GREEN
Pročitaj više
65 UNI Winter
Pročitaj više
Energy 2020
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na web stranici, želite saznati više?
Pošaljite nam svoj upit i naš će stručnjak odgovoriti na vaše pitanje.