Foam Adhesive for Bricklaying
Description
Foam Adhesive for Bricklaying is an alternative for cement-based thin bed mortars. It is suitable for bonding a wide range of calibrated materials such as autoclaved aerated concrete, calibrated ceramic bricks and silicate blocks.
Benefits
24 h – full wall resistance
Stronger than traditional mortars
Resistant against fire and seismic activity
Reduction of thermal bridges
Hundreds of years of durability
Cleaner and faster bricklaying
Tested and approved for: AAC, calibrated ceramic and silicate block
Can be applied in below zero temperatures
Applications
Load bearing walls
Partition walls
Cellular concrete, calibrated ceramic bricks and silicate blocks
Technical parameters
Yield:
up to 12 m²
Application temperature:
-10°C to +30°C
Can temperature:
+10°C to +30°C
Initial cure:
2 h
Full cure time:
24 h
Correction time:
≤ 3 min
Coefficient of thermal conductivity:
(λ) < 0,036 W/mK
Logistics
Product name
Jedinstvena šifra dodijeljena odgovarajućim varijantama proizvoda, specificirajući njihov kapacitet, veličinu i boje.
Foam Adhesive for Bricklaying
Content
870 ml
Packaging
Can
Pieces per box
12
Pieces per pallet
624
| Product name Jedinstvena šifra dodijeljena odgovarajućim varijantama proizvoda, specificirajući njihov kapacitet, veličinu i boje. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Foam Adhesive for Bricklaying | 870 ml | Can | 12 | 624 |
Slično u kategoriji
60 SEKUNDI
Pročitaj više
Styro 753 Foam Adhesive
Pročitaj više
G-K SUSTAV
Dodaj za usporedbu
Ukloni
Proizvod iz druge kategorije. Ne može se usporediti.
GK ljepilo
Pročitaj više
Foam Adhesive for Bricklaying
Pročitaj više
Imate li pitanja o proizvodu?
Niste pronašli informacije na web stranici, želite saznati više?
Pošaljite nam svoj upit i naš će stručnjak odgovoriti na vaše pitanje.