Energy 2020
Description
Gun Polyurethane Foam
Innovative gun polyurethane foam which eliminates thermal bridges efficiently and permanently. It reduces heat loss in joinery insulation by up to 60%*.
Perfect solution for energy-efficient buildings.
* Value based on theoretical calculations regarding energy efficiency of insulation between window frame and wall based on Energy 2020 PU foam versus standard foams of Selena Group: ITB report number 02207/13/Z00NF. Should not be associated with the energy efficiency of the entire building. More information available in technical documentation.
Advarsel: Følg alltid informasjonen på produktetiketten.
Benefits
Reduces heat loss in joinery insulation up to 60% (Reduced building / room operating costs; perfect for low energy buildings)
Eliminates of linear thermal Bridges
Resistant to adverse weather conditions (airtight to 1200 Pa, watertight to 1800 Pa)
Convenient work also in low temperature (till -10°C, thanks to even expansion)
External noise reduction 64 dB
Does not emit MDI during application**
** Lack of MDI emission was certified by the Swedish SP Proving Forskning Institute.
Applications
Perfect for insulation energy-efficient windows and doors
Filling in places prone to thermal bridging
Technical parameters
Heat transfer coefficient:
U ≤ 0.5 W/m²K
Air permeability:
class 4 (1 200 Pa)
Air permeability coefficient:
a < 0.01 m³/(m*h*daPa2/3)
Water tightness:
class E 1800 Pa
Water vapour permeability μ:
16
Yield:
up to 45 l
Cutting time:
≤ 30 min****
Application temperature:
-10°C to +35°C
Can temperature:
+5°C to +30°C
Shelf life:
18 months
*** Product classified by the Building Information Foundation, RTS, as an M1 class building material. Once cured, it does not emit any hazardous substances. All the parameters were measured in compliance with Selena’s internal standards and depend heavily on external curing conditions, equipment quality and adhering to the application instructions. The parameters were measured under standard laboratory conditions: +23°C and 50% RH.
**** 30 minute cutting time and full hardening after 24 h can be achieved by “wet” application, i.e. by wetting the surface with a water mist before application and foam immediately after application at a temperature of min. +20°C for joints up to 3 cm.
Logistics
| Product name En unik kode som er tilordnet de respektive produktvariantene, og som angir kapasitet, størrelse og farger. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Energy 2020 | 750 ml | Can | 12 | 624 |
Lignende i kategorien
NEW ON THE MARKET
Legg til for sammenligning
Fjern
Et produkt fra en annen kategori. Kan ikke sammenlignes.
LOW-EX GREEN
Les mer
65 UNI Winter
Les mer
65 UNI
Les mer
Energy 2020
Les mer
Har du spørsmål om produktet?
Fant ikke informasjonen på nettstedet, ønsker du å lære mer?
Send oss din forespørsel, og vår spesialist vil kontakte deg med svaret.