Evomer Fast Primer
Description
Fast Drying Bitumen-Polymer Primer
Evomer Fast Primer is an innovative bitumen-polymer fast drying solution intended for preparing the roof surface before installation of roofing and waterproofing materials. Due to the introduction of polymerization technology, the primer features perfect adhesion and ensures full surface stability. Evomer Fast Primer does not contain any organic solvents, so it is non-flammable and is safe for both polystyrene and the environment.
Benefits
Drying time within 20 min only
High yield
Safe (non-flammable, no solvents)
Applications
Preparation of mineral, bitumen, wooden and steel surfaces prior to the installation of waterproof membranes
Technical parameters
Consistency:
liquid, homogeneous, without inclusions
Drying temperature +23°C / 50% RH on concrete:
20 min
Drying temperature +5°C / 50% RH on concrete:
60 min
Drying temperature +23°C / 50% RH on non-absorbing surfaces (steel, roof felt):
30 min
Application temperature:
+5°C to +35°C
Elasticity at low temperature (cold bending):
-20°C
Vertical flow resistance at increased temperature:
+90°C
Logistics
Product name
En unik kod som tilldelas respektive produktvariant och som anger dess kapacitet, storlek och färger.
Evomer Fast Primer
Content
9 kg
Packaging
Bucket
Pieces per pallet
44
| Product name En unik kod som tilldelas respektive produktvariant och som anger dess kapacitet, storlek och färger. | Content | Packaging | Pieces per pallet |
|---|---|---|---|
| Evomer Fast Primer | 9 kg | Bucket | 44 |
| Evomer Fast Primer | 18 kg | Bucket | 27 |
Liknande i kategori
Aqua Protect Polyurethane-Bituminous Resin
Läs mer
Alubit Reflex Protective Roof Coating
Läs mer
Abizol KL-DM Cold Applied Adhesive for Bitumen Rolls
Läs mer
Abizol H/RDR Deep Penetrating Primer
Läs mer
Har du frågor om produkten?
Hittade inte informationen på webbplatsen, vill du veta mer?
Skicka oss din förfrågan så kommer vår specialist att återkomma till dig med svaret.