CONTAINS RENEWABLE RAW MATERIALS
Ultra Fast 70
Големина:
870 ml
TYTAN PROFESSIONAL Ultra Fast 70 is a high-performance new generation foam that is 30% based on renewable raw materials.
Description
TYTAN PROFESSIONAL Ultra Fast 70 is a high-performance new generation foam that is 30% based on renewable raw materials. The foam is an excellent solution for the installation of joinery as well as in other construction works requiring short installation time and high efficiency.
TYTAN PROFESSIONAL Ultra Fast 70 is characterized by high efficiency up to 77 liters and low post-expansion. The modern formula allows pre-processing in less than 20 minutes. Full cure time is 1.5 hours which allows installer to proceed to the next installation steps. The good foam structure provides very high up to 63 dB acoustic and thermal insulation. The foam is resistant to mold and mildew as well as to high and low temperatures.
Предупредување: Секогаш следете ги информациите на етикетата на производот.
Benefits
High yield up to 77 l *
Fast curing time after 1.5 h *
- Short cutting time ≤ 20 min *
- Low post expansion
- Contains 30% renewable raw materials in the can
Applications
- Seals for window and door installation, window sills, roller shutters, stair steps
- Seals for roof, wall and ceiling joints
- Filling of free spaces, cracks, gaps, pipe penetrations
- Filling and soundproofing of partition walls
- Thermal and acoustic insulation
Technical parameters
Yield:
up to 77 l
Cutting time:
≤ 20 min.*
Full curing time:
≤ 1.5 h
Volume growth (post-expansion):
≥ 40%
Ambient temperature:
+5°C to +30°C
Can temperature:
+10°C to +30°C
Thermal conductivity coefficient (λ):
0,036 W/mK
Acoustic insulation:
up to 63 dB
Reaction to fire:
B3 / F (DIN 4102 / EN 13501-1)
*
All given parameters were taken at 23°C and 50% humidity. The final result largely depends on the amount of foam applied, can temperature, application surface, quality of equipment used and skills of the installer. For gaps wider than 3 cm, parameter values may differ from those declared in the technical data table. 20 minutes cutting time and processing after 1.5 h can be achieved by "wet" application e.g. dampening the surface before application and immediately after foam application at a minimum temperature of +20°C.
Logistics
| Product name Уникатен код доделен на соодветните варијанти на производот, кој ја специфицира нивната капацитет, големина и бои. | Content | Packaging | Pieces per box | Pieces per pallet |
|---|---|---|---|---|
| Ultra Fast 70 | 870 ml | Can | 12 | 720 |
Слично во категорија
WINS Fast Foam
Прочитај повеќе
WINS Flex Foam
Прочитај повеќе
Low Expansion Winter
Прочитај повеќе
Low Expansion Summer
Прочитај повеќе
Дали имате прашања за продуктот?
Не го најдовте информацијата на веб-страницата, сакате да дознаете повеќе?
Испратете ни вашето прашање и нашиот специјалист ќе ви се врати со одговор.