Description
Wood Effect Plaster created based on white cement, mineral fillers, and aggregate. Product plasticity and its working time were designed to support decorative works on facades, especially effects imitating wood. Special additives make the plaster easier to apply. When fully cured, it creates a breathable, strong, and durable coating that can be stained to achieve the expected colour of the wood.
Benefits
High plasticity and prolonged open time of the product supports in structuring the wood effect
Resistance to mechanical damage and microcracks
Resistant to biological corrosion
Good protection against moisture
To be staining for a more natural wood effect
Applications
For exterior and interior structural plaster effects
Applied on all seasoned, even, and load-bearing construction surfaces
Finishing layer in TYTAN ETICS EPS and TYTAN ETICS MW thermal insulation systems
Creates a protective and decorative surface coat for modelling the structure of natural wood
Technical parameters
Colour:
white
Mixing ratio (water per bag):
5,25÷5,5 l per 25 kg
Adhesion:
≥ 0,3 MPa
Vapour permeability, grade:
V1
Water absorption, grade:
W2
Consumption:
2,2-4,2 kg/m²
Painting:
after 3 days
Shelf-life:
12 months
emperature of application:
from +5°C to +25°C
Maturing time:
5 min
Pot life of a water mix:
up to 2h
Drying time:
1–3 days
Complete setting time:
28 days
Logistic table
Product name
Уникатен код доделен на соодветните варијанти на производот, кој ја специфицира нивната капацитет, големина и бои.
Wood Effect Plaster
Content
25 kg
Packaging
Bag
Pieces per pallet
48
Product name Уникатен код доделен на соодветните варијанти на производот, кој ја специфицира нивната капацитет, големина и бои. | Content | Packaging | Pieces per pallet |
---|---|---|---|
Wood Effect Plaster | 25 kg | Bag | 48 |
Дали имате прашања за продуктот?
Не го најдовте информацијата на веб-страницата, сакате да дознаете повеќе?
Испратете ни вашето прашање и нашиот специјалист ќе ви се врати со одговор.